Plug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver

Plug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver



Looking to improve the fuel economy of your car? Introducing the Plug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver. This innovative device is a must-have for cars sold after January 1st, 1996 in the USA, after January 1st, 2001 in the European Union, and with a benzine engine sold after January 1st, 2003.

So, what exactly does the EcoOBD2 do? This powerful chip tuning box creates a new map in your car's computer ECU based on your driving habits, resulting in lower fuel consumption. As you drive more kilometers or miles, the EcoOBD2 continuously renews the map and adjusts itself to perfectly match your car, ensuring maximum fuel savings.

The EcoOBD2 Chip Tuning Box is designed to be easily plugged into the OBD2 connector of your car. Once connected, it receives information from the car's computer ECU and uses that data to adjust the boost pressure, quantity of fuel, injection timing, and pressure to decrease fuel consumption. It's important to note that the EcoOBD2 Chip Tuning Box operates within the manufacturer's requirements and does not cause any negative effects to the car's factory settings or damage the engine or ECU.

Installation and calibration of the EcoOBD2 is a breeze. Simply pull the car key out from the ignition, find the OBD2 connector in your car, and plug in the EcoOBD2. Then, insert the key into the ignition and twist it to the first stage (without starting the car). Press the reset button for about 5 seconds and wait for around 30-54 seconds while the EcoOBD2 communicates and establishes a connection with the ECU. Finally, start up the engine, and after driving approximately 200 km or 150 miles, the EcoOBD2 will recognize your vehicle and driving habits, adjusting itself for optimal fuel savings.

Wondering if your car has an OBD2 connector? On-Board Diagnostics, or OBD, is a computer-based system built into all 1996 and later light-duty vehicles and trucks as required by the Clean Air Act Amendments of 1990. OBD systems monitor the performance of key engine components responsible for controlling emissions.

The Plug and Drive EcoOBD2 Economy Chip Tuning Box is specifically designed for benzine engines and offers up to 15% fuel savings. It works by remapping the car's computer ECU based on OBD2 protocols. After driving a total of 200 km, the EcoOBD2 will adjust itself to your car and driving habits, continuously remapping the ECU to save fuel and reduce emissions.

Included in the package is one EcoOBD2 Chip Tuning Box Interface, ready to transform your car's fuel economy. Upgrade your driving experience and start saving on fuel costs with the Plug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver.

Overview:

OBD2 necessarily for cars:

- Sold after January 1st, 1996 in the USA

- Sold after January 1st, 2001 in the European Union

- With Benzine engine sold after January 1st, 2003

What does EcoOBD2 make?

According to your driving habits, EcoOBD2 makes new map in the car's computer ECU for the vehicle's lower fuel consumption. As you driving much more KM/Mile, EcoOBD2 renews the map and adjusts itself to match your car perfectly for more fuel saving.

What is EcoOBD2 Chip Tuning Box?

EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.

EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.

EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.

EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.

EcoOBD2 Installation and Calibration steps:

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)

5 - Start up the engine.

6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.

Does your car have OBD2 connector?

On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

Specifications:

• Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Saving.
• It works based OBD2 protocols as remaping the Car's computer ECU. 
• After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission.

Package Content:

1pc x EcoOBD2 Chip Tuning Box Interface

8719921447258-CJQCGJQT00061