Wireless Car Vacuum USB Charging Wet Dry Dual-use Cleaner

Product Introduction:

1. Material: large ABS, transparent cover PS.

2. Battery capacity: 1200 mAh.

3. Scope of application: car home, etc.

4. Features: wireless, small size, can suck, can blow, etc.

5. Accessories: charging cable, long flat mouth, brush, blow nozzle.

Disassembly and cleaning:

1. Rotate the dust bin counterclockwise to remove the dust bin from the fuselage.

2. Take out the Hipa filter in the dust bin and pour the garbage into the trash can.

3. If necessary, use a slightly wet rag or disposable paper towel to clean the dust cup. The filter can be rinsed with water, and must be thoroughly dried after washing.

4. To reinstall the dust bin, put the Hipa filter into the dust bin, rotate it in the opposite direction and tighten it according to Step 1.

Instructions for use:

1. Connect the charger to fully charge the battery.

2. Connect the corresponding accessories according to the use occasion. (accessories installation and use)

3. Turn on the power switch of the vacuum cleaner to start working. (charging: red light state, full: green light state, working: green light state)

Note:

1. Do not remove, repair or modify this product unless authorized repair personnel.

2. Do not cover the air intake or exhaust when operating this product, otherwise the product may be deformed or caught on fire due to overheating.

3. Do not inhale combustibles, such as cigarette butts, when using this product.

4. Please place the product properly and keep it away from children.

5. Make sure that the switch of the charging cable is turned off. It is stritly prohibited to use the charging cable while charging.

10854352093530-3256811636731494